We produced by a steel mill or aluminium plant is formed (via
rolling or extrusion) into long continuous strips of various size
and shape. These strips are cut at regular intervals and allowed to
cool, each segment becoming a piece of bar stock. A good analogy is
pasta-making, in which lumps of dough are extruded into various
cross-sectional shapes; cut into lengths; and then dried in that
form. The cross-sectional shapes of pasta vary from simple bar or
tube shapes (such aslinguine or penne) to more elaborate extrusions
(such as rotelle, fiori, or rotini). The same is true of metal bar
stock. The most common shapes are round bar (also called rod),
rectangular bar (including square bar, the special case of equal
sides), and hexagonal bar (usually called hex bar for short).
| Standards | Designation |
|---|
| ASTM | A 276 |
|---|
| Length | Diameter |
|---|
| Within 6m | 5mm-350mm |
|---|
| Type | Certification |
|---|
| 316Ti Stainless Steel Round Bar | ISO 9001:2008 |
|---|
Below you will find a brief overview of a number of stainless steel
bar specifications. If you do not see a specification listed,
please contact us.
| BS | JIS | IS | DIN | ASTM | |
|---|
| Semi Free Cutting Steel | 15AM/8M | SMn433H,SUM 41 | 13S25/ 40C10S 18/40Mn15S12 | — | 1137,1140 |
| Free Cutting Steel | EN-1A
EN-1A L | SUM-23
SUM-24 L | 11C10S25
—— | 9SMn30
9SMnPb30/ 11SMnPb30 | 1212/ 1213
12L14/ 12L15 |
Stainless Steel Bar Specifications |
|---|
ASTM A276 | This specification encompasses cold-finished or hot-finished bars,
including rounds, squares, and hexagons, and hot-rolled or extruded
shapes, such as angles, tees, and channels in the more commonly
used types of stainless steels. |
ASTM A479 | This specification includes cold and hot finished stainless steel
bars, including rounds, squares, and hexagons, and hot-rolled or
extruded shapes such as angles, tees, and channels. |
ASTM A484 | This specification includes wrought stainless steel bars, shapes,
forgings, and billets or other semi-finished materials, except
wire, for forging. The materials are available in four types of
conditions. |
ASTM A582 | This specification includes cold or hot finished bars, which are
suitable for machining processes. This specification includes
rounds, squares, and hexagons, from common types of stainless
free-machining steels. |
ASTM B473 | This specification includes nickel alloy bar & wire, which can be
produced in a solution-annealed condition, stabilized-annealed
condition, or annealed condition. |
Our Grades :
AISI:
201, 202, 301, 302, 303, 304, 304H, 304L, 316, 316H, 316L, 309,
309S, 310, 310S, 316Ti, 317, 317L, 347, 321, 321H, 410, 416, 420,
430, 430F, 431, 440C, 630, 17-4PH, F51
DIN:
WNR1.4301, WNR1.4305, WNR1.4306, WNR1.4307, WNR1.4401, WNR1.4404,
WNR1.4571, WNR1.4541, WNR1.4828, WNR1.4841, WNR1.4845, WNR1.4449,
WNR1.4438, WNR1.4310, WNR1.4550, WNR1.4541, WNR1.4878, WNR1.4006,
WNR1.4005, WNR1.4021, WNR1.4028, WNR1.4016, WNR1.4104, WNR1.4105,
WNR1.4057, WNR1.4542, WNR1.4462
