EN 10088-2 1.4404 Stainless Steel Plate Sheet Thickness 0.4 - 100mm
Inox 1.4404 Stainless Plate
Specification of our EN 1.4404 Stainless Steel Plate
| Products | 1.4404 Stainless Steel Plate Sheet |
| Thickness | cold rolled 0.4 - 5.0mm |
| hot rolled 3.0 - 100mm |
| Width | cold rolled 1000mm 1219mm 1500mm |
| hot rolled 1500mm 1800mm 2000mm |
| Surface | 2B BA NO.1 NO.4 8K HL |
| Brand | TISCO BAOSTEEL POSCO JISCO |
| Standard | EN 10088-2 ASTM A240 JIS G4303 |
| Service | Cutting , Surface Finishing |
| MOQ | 500 kgs |
| Packing | Wooden pallets and waterproof paper |
| Loading Port | Shanghai Port,China |
| FCL Qty | 25 Tons each 20ft and 40ft container |
Description of EN 1.4404 Stainless Steel Plate
EN 1.4404 material (stainless steel X2CrNiMo17-12-2) is a
low-carbon version of 1.4401 (X5CrNiMo17-12-2), the maximum carbon
content is only 0.03%, while 1.4401 is 0.07% maximum, so the
weldability and corrosion resistance of 1.4404 stainless steel is
better than 1.4401. The chemical composition of material 1.4404 and
1.4401 contain molybdenum (Mo), while EN 1.4301 (X5CrNi18-10) and
1.4307 (X2CrNi18-9) do not. Molybdenum improves the heat resistance
of steel and resists pitting and crevice corrosion in environments
containing chlorides or other halides.
Chemical composition of EN 1.4404 Stainless Steel Plate
DIN EN 1.4404 material chemical composition is listed in the
following table.
| | Chemical composition % | |
| Standard | Steel name (Steel number) | C ≤ | Si ≤ | Mn ≤ | P ≤ | S ≤ | Cr | Ni | Mo | N ≤ |
| EN 10088-1 | X2CrNiMo17-12-2 (1.4404) | 0.03 | 1.00 | 2.00 | 0.045 | 0.030 | 16.5-18.5 | 10.0-13.0 | 2.00-2.50 | 0.10 |
Mechanical Properties of EN 1.4044 SS Plate
The following table gives the material 1.4404 mechanical properties
in the solution-annealed condition for steel sheet, steel plate and
steel strip.
| Standard | Grade | Product | Thickness (mm), ≤ | 0,2 % Y.S(Mpa) | T.S (MPa) | Elongation (%) | Impact (J) |
| EN 10088-2 | (1.4404) | cold rolled strip | 8 | ≥240 | 530-680 | ≥40 | – |
| hot rolled strip | 13,5 | ≥220 | 530-680 | ≥40 | 100 |
| hot rolled plate | 75 | ≥220 | 520-670 | ≥45 | 100 |
The following table gives the steel 1.4404 mechanical properties in
solution annealed condition for semi-finished products, bars, rods,
wires, profiles and bright products.
| | Mechanical properties (solution annealed) |
| Standard | Steel Grade (Steel Number) | Diameter (d) or Thickness (t) in mm | Hardness (HB) | 0.2% yield strength (N/mm2) | 1% yield strength (N/mm2) | Tensile strength (N/mm2) | Elongation (%) | Impact energy (J) |
| EN 10088-3 | X2CrNiMo17-12-2 (1.4404) | d≤160 | ≤ 215 | ≥ 200 | ≥ 235 | 500-700 | 40 (Longitudinal) | ≥ 100 (Longitudinal) |
| 160<t≤250 | 30 (Transverse) | ≥ 60 (Transverse) |
Applications of EN 1.4404 Stainless Steel Plate Sheet
1.4404 material is normally firstly processed into many
intermediate products such as square steel, round steel, sheet
steel, steel strip, steel rods and other forms of steel bars, etc.,
and then processed into finished products such as pipe fittings,
angle steel, stainless steel wire mesh, decorative fabrics, filter
element, filter cartridges, flanges, valves, elbows, watch straps,
etc. are widely used in aerospace, petrochemical, architectural
decoration, and daily necessities industries.
Equal grade of 1.4404 Stainless Steel
EN 1.4404 stainless steel (material X2CrNiMo17-12-2) is equivalent
to the American standard ASTM AISI SAE; ISO, Japanese JIS and the
Chinese GB standard (for reference).
| EN 1.4404 (X2CrNiMo17-12-2) material equivalent |
| European Union | US | ISO | China | Japan |
| Standard | Steel Name (Material Number) | Standard | Grade (UNS) | Standard | ISO name (ISO number) | Standard | Grade | Standard | Grade |
EN 10088-2;
EN 10088-3 | X2CrNiMo17-12-2 (1.4404) | AISI SAE;
ASTM A959;
A240/A240M;
A276/A276M | 316L (UNS S31603) | ISO 15510 | X2CrNiMo17-12-2 (4404-316-03-I) | GB/T 20878;
GB/T 1220;
GB/T 3280 | 022Cr17Ni12Mo2;
00Cr17Ni14Mo2 (Old name) | JIS G4304 | SUS316L |
Products Show
