3D Embossed Stainless Steel Sheet Rice / Bead / Rhombus SS Sheet
for Decorations
Products Specification
| Stainless Steel embossed sheet |
| 201, 202, 301, 302, 304, 304L, 310S, 316, 316L, 321, 430, 430A,
309S, 2205, 2507, 2520, 430 , 410, 440, 904Lect, Or Customized |
| 2B,BA,8KMirror,Drawing HL,N Titanium plating,Etching,Embossing |
| Length:0.1m~12m (All Sizes Can be customzied)
Width:1000mm/1219mm/1240mm/1500mm |
| ASTM, JIS, GB, AISI, DIN, BS,EN |
| Food industry and surgical equipment, household goods, cabinets
etc. |
| ISO 9001 BV SGS |
| Industry standard packaging or according to client's requirement |
| 1.Environmental protection: can effectively reduce environmental
pollution.
2.Corrosion resistance: Strong anti-fouling, acid, corrosion, wear
resistance, non-radioactive.
3.Surface cleanliness: The product surface is smooth and compact,
not easy to be polluted by dust, and has good self-cleanliness.
4.Easy Maintenance: A slight loss is easy to repair. |
Material:
300series:301,302,303,304,304L,309,309s,310,310S,316,316L,316Ti,317L,321,347,
200series:201,202,202cu,204;
400series:409,409L,410,420,430,431,440;
Others:2205,2507,2906,330,660,630,631,17-4ph,17-7 ph,904L,etc
Size:
Thickness:
Cold rolled: 0.4mm-3.0mm
Width: 1000/1219/1500mm
Length: as customer requirement
Surface: 2B, BA, No.4,HL,180Grit,320Grit,embossed ,etc
Design:various kinds of molds are avaible,can be customized
according to requirement.
How the embossing process typically works:
1. Stainless Steel Sheet Selection: The process begins with selecting the appropriate stainless steel
sheet. Stainless steel is chosen for its durability, corrosion
resistance, and overall aesthetic appearance.
2. Design Selection: A design or pattern is chosen for the embossing process. There
are various patterns available, ranging from simple geometric
shapes to intricate textures.
3. Surface Preparation: The stainless steel sheet’s surface is thoroughly cleaned to
remove any dirt, oils, or contaminants that could interfere with
the embossing process.
4. Embossing: The cleaned stainless steel sheet is then placed between
embossing rollers, which apply pressure and create the desired
pattern on the sheet’s surface. The embossing rollers have the
pattern engraved on them, and they transfer the pattern to the
metal as it passes through.
5. Heat Treatment (Optional): In some cases, after embossing, the stainless steel
sheet may undergo a heat treatment process to stabilize the metal’s
structure and relieve any stresses created during embossing.
6. Trimming and Cutting: Once embossing is complete, the stainless steel sheet may be
trimmed or cut to the desired size or shape.
Packing:
Protected by PVC and PE cover.packed and labeled according to the
regulations and customer's requests.Great care is taken to avoid
any damage which might otherwise be caused during storage or
transportation. In addition, clear labels are tagged on the outside
of the packages for easy identification of the product I. D. and
quality information.
All our productsare packed, stored, transported according to the
international regulation.
The products are wrapped with anti-rust paper and steel rings to
prevent damage. Identification labels are tagged according to
standard specification or customer's instructions. Special packing
is available as per customer's requirement.Ply wooden box are
available for special protection. Other kinds of packing can be
offered if request. stainless steel sheets are packed with PVC coat
main side and packed in wooden crate.
